5" x 2" Inch Rigid Caster - Mold-On Rubber Wheel - 400 Lbs Capacity

Mold On Rubber Wheels is one of the oldest and most well-known types of caster in the industry. These wheels have a Rubber tread vulcanized to a heavy-duty industrial cast iron/steel core. These wheels offer a very shock-absorbing semi-cushioned ride, rolls easily over small debris, rough floors, cracks, and joints. The rubber on Iron wheels are economically and affordably priced. Great floor protections and a very quiet rolling operation. These wheels work great in outdoor environments; however cast iron cores can rust; if this is an issue look at using aluminum or plastic core wheels although you will lose some of the shock-absorbing features if you do so. The treads on Mold on Rubber Wheels have a softer 80 Shore A Durometer and a Temperature range: -40° F to 180° F. These wheels come standard with a 3/4" Roller bearing with a 1/2" Spanner Bushing to fit your standard 1/2" axle/bolt.

• Rubber tread vulcanized to heavy-duty cast iron core.
• Offers shock absorbing semi-cushioned ride, rolls easily over small debris, rough floors, cracks, floor joints, etc.
• Provides good floor protection and quiet rolling operation.
• Economically priced cushion wheel.
• Works well in outdoor environments; however cast iron core can rust; if this is an issue look at using aluminum or plastic core wheels.
• Temperature range: -40° F to 180° F.