This standardized 2-3/8" × 3-5/8" plate caster is commonly specified for light-duty carts, fixtures, racks, and mobile assemblies where compact mounting and dependable rolling matter. Choose your wheel material based on floor conditions, noise requirements, and service life targets.
Fit tip: confirm plate size, bolt pattern, overall height, wheel diameter, and swivel clearance before ordering.
Phenolic Wheels
Very low rolling resistance for smooth floors and carts.
Thermo Rubber Wheels (TPR)
Quieter, floor-friendly rolling for indoor institutional use.
Polyurethane Wheels
Durable all-around tread with strong service life.
Gray Iron Wheels
Rugged wheel for durable floors where noise is acceptable.
Blue Solid Poly Wheels
Tough, non-marking performance for industrial carts.
Choose wheel material based on floor type, noise goals, and push-force requirements.
Need your cart or equipment to stay put when parked? Total locking casters lock both wheel rotation and swivel at the same time. This matching category includes total lock brake options for the same 2-3/8" × 3-5/8" plate size, across multiple wheel materials.
Shop Total Lock for 2-3/8" × 3-5/8" Plate
Same plate size. Total lock brake. Multiple wheel materials.
Browse All Total Locking Casters
Compare stem and plate mount total lock options across wheel sizes and capacity ranges.
Total Locking Casters Hub
Wheel + swivel lock brake across duty classes.
When to choose Total Lock
Use total lock when parked stability matters.
Total lock selection guide
Quick comparison to confirm when total lock is the right brake.
| Specification | Details |
|---|---|
| Mounting Plate | 2-3/8" × 3-5/8" |
| Bolt Hole Pattern | 1-3/4" × 2-7/8" (slotted to 3") |
| Wheel Width | 1-1/4" |
| Wheel Diameter | 3"–5" |
| Load Capacity | Up to 350 lb per caster (varies by model) |
| Wheel Types | Phenolic • TPR • Polyurethane • Gray Iron • Blue Solid Poly |
| Compliance | ANSI • ICWM • NSF • RoHS • ISO 9001:2015 |
Selection tip: ratings are per caster under ideal conditions. For ramps, joints, debris, or impacts, increase wheel diameter or step up one duty class.
Confirm plate size, bolt pattern, overall height, wheel diameter, and swivel clearance before ordering.
If you roll over thresholds, debris, ramps, or experience impacts, consider a larger wheel diameter or stepping up one duty class.
TPR is quieter and floor-friendly, phenolic rolls with low resistance, polyurethane is a durable all-around choice, and iron is for rugged floors.
Light-duty carts and mobile assemblies using standardized institutional plate mounting.
Yes. It is one of the most widely used institutional plate sizes in light-duty caster series.
Choose based on floor type, noise goals, and rolling resistance. Use the wheel material tiles above to match your application.
Yes. Use the Total Lock section above to shop matching plate size options that lock wheel rotation and swivel simultaneously.
These calculators apply to any caster application—even if you’re browsing a different category. Use them to estimate load rating per caster, select wheel material, and estimate push/pull force. Expand any tool for full analysis + a share-ready spec line.
Engineering Tools Hub
All tools + dedicated pages (best for sharing and EEAT). Open hub
Load Calculator (dedicated)
Share this page when discussing load rating per caster. Open load tool
Wheel Diameter Calculator
Publish the dedicated page, then replace this link. Find in hub
Failure Diagnosis Tool
Publish the dedicated page, then replace this link. Find in hub
Trusted by 100,000+ Industrial and Commercial Buyers | 98.7% on-time shipment rate
Designed for engineers, manufacturers, and material handling professionals
