Caster Headquarters Wire Shelving Casters are a universal O.E. Replacement Shelving Caster that fits into most Wire Shelving Units and most Metal Wire Shelving Racks tubing. Our Wire Shelving Wheels are a high-quality chemical resistant non-marking polyurethane tread on a polyolefin core. To install on these casters on metal shelving simply pop out the plastic insert that is located in the bottom of your shelving legs with a flat head or needle nose pliers and insert these shelving casters by pushing the stem with some force until the wire shelving legs sit flush onto the casters raceway.
If you are looking for wire rack wheels only we carry those replacements as well. You can upgrade your static wire racks with our high-quality casters or replace your old Wire Shelving Casters with a high-quality Replacement from Caster Headquarters. CasterHQ's wire shelving casters come with the highest quality polyurethane wheels on the market. Benefits of polyurethane material offer high resistance to grease, oils, and acids up to 12% acidity, excellent roll-ability and ergonomics, great floor protection, moderate to quiet noise levels.
Set includes 4 Swivel casters with Top Lock Brakes!
For quick online service please email us: firstname.lastname@example.org and a Caster Expert will help you answer any questions.
We ship Fast!!! If ordered before 12-noon we ship all orders typically ship SAME DAY! All orders received after 12-noon will ship the following business day!
*** CLICK ON PHOTOS OR LISTINGS TO VIEW FULL PRODUCT PAGES ***
How To Remove and Install Wire Shelving Wheels
To install these casters on a metal or wire rack with no casters simple press these casters into the legs with moderate force until the stem no longer shows and the casters sit flush. To remove simply lay down the wire rack and pull the wire rack casters out of the legs with moderate force. Our wire rack casters should install and remove by hand. No tools are normally needed. You can always change the wheels if you don't need to buy complete casters as well. Click Here to visit our web page to purchase the wheels separately. To remove the old wheels from your casters you will need a 9/16" ratchet to remove the 3/8" axle bolt. After you remove the axle simply replace wheel and re-install axle. Lock nuts are provided with the casters when you buy them from us so you will need to reinstall using our special lock nuts to make sure the axle stays in place.