Up to 350 lbs
Up to 6,000 lbs
Up to 16,000 lbs
Up to 40,000 lbs
High-capacity loads
Shock absorbing
Corrosion resistant
Outdoor / rough terrain
OEM replacements
All measurements indicate the wheel diameter by the tread width.
The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.
W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.
Plate dimensions shown are overall mounting plate size.
When replacing existing casters, select the closest plate size and verify bolt-hole compatibility.
BHP = Bolt Hole Pattern, shown under each plate.












U-Boat Carts are the large carts typically seen at the large hardware stores such as Home Depot, Lowes, and other large retail chains used to move heavy materials. U-Boat carts are the same carts you commonly use in order to move wood in which the cart has two larger wheels in the middle of the cart and four smaller wheels in all four corners. Most U-Boat Carts contain two 8 inch polyurethane wheels and 4-inch polyurethane wheels. We offer the direct OEM brand of Casters and Wheels seen on carts manufactured and used on all Home Depot Carts, Lowes Carts, and many other U-Boat Carts in the industry seen in many different hardware and retail stores around the USA. Don't buy a knock-off from somebody else, buy the original wheels used on these carts for the highest quality casters and wheels as well as the best performance in the industry direct from Caster Headquarters.
