Specialty Casters
Gate Casters
BBQ Pit & Smoker Casters
Keyed Drive Wheels
Drywall Cart Casters
Skid Wheels & Casters for RVs
Leveling Casters
Shopping Cart Wheels & Casters
Band Equipment Casters & Wheels
Low Profile Casters
Cart Wheels & Casters
Toolbox Caster Sets
Bakery Oven Rack Casters
Kitchen Prep Table Caster Sets
Wire Shelving Casters
Silent Glide Casters
Wheel = wheel diameter · capacity is per caster.
Caster plate mounting kits with carriage bolts, thread-cutting screws, flat washers and lock nuts in 5/16-18, 3/8-16 and 1/2-13: 16 pieces for one caster or 64 for four.
| Size | 16-piece pack (1 caster) | 64-piece set (4 casters) |
|---|---|---|
| 5/16-18 | 4 each of carriage bolts, thread-cutting screws, washers, lock nuts | 16 of each |
| 3/8-16 | 4 of each | 16 of each |
| 1/2-13 | 4 of each | 16 of each |
Product descriptions [S1]. Zinc-finish steel.
Measure the bolt holes in the caster's top plate and in the frame, and use the largest of the three sizes that passes through both with a little clearance. All four holes on one plate take the same size.
Plate casters: industrial casters. Stem sockets: tee nuts and sockets.
Carriage bolts, hex thread-cutting screws, SAE flat washers and nylon-insert lock nuts. The 16-piece pack does one caster and the 64-piece set does four.
5/16-18, 3/8-16 and 1/2-13.
The largest bolt that fits the holes in the top plate. Measure the holes.
No. This page has bolt kits only.
