Total locking casters use a dual-action brake that locks both wheel rotation and swivel to reduce drift and unwanted movement. They’re used on carts, workstations, racks, medical equipment, retail fixtures, and industrial platforms that must stay securely positioned.
Total lock casters are also searched as total lock caster wheels, total brake casters, and wheel and swivel locking casters.
Capacity note: “Set of 4” capacity is a planning estimate (4 × per-caster rating). For uneven floors, impacts, and corner loading, size up.
Stem Mount Total Lock (3"–5")
Multiple threaded stem options • Up to 350 lbs per caster • ~1,400 lbs per set of 4
Plate Mount Total Lock (3"–5")
Plate 2-3/8" × 3-5/8" • Up to 350 lbs per caster • ~1,400 lbs per set of 4
Heavy Plate Mount Total Lock (4"–8")
Plate 4" × 4-1/2" • Up to 1,250 lbs per caster • ~5,000 lbs per set of 4
Quick fit check: Match plate size/bolt pattern (or stem thread/spec), then choose wheel size + capacity.
| Brake Type | What It Locks | Best For | Outcome |
|---|---|---|---|
| Total Lock | Wheel + Swivel | Secure parking, precision positioning, slopes | Maximum stability & reduced drift |
| Wheel Brake | Wheel only | Basic stopping on flat floors | Stops rolling; caster can still swivel |
| Directional Lock | Swivel tracking | Long runs, straighter steering | Tracks straight; does not stop rolling |
| Collection | Wheel Range | Mount | Per Caster | Set of 4 (Est.) |
|---|---|---|---|---|
| Stem Mount Total Lock | 3"–5" | Threaded stem | Up to 350 lbs | ~1,400 lbs |
| Plate Mount (Small Plate) | 3"–5" | 2-3/8" × 3-5/8" | Up to 350 lbs | ~1,400 lbs |
| Plate Mount (Heavy Plate) | 4"–8" | 4" × 4-1/2" | Up to 1,250 lbs | ~5,000 lbs |
Tip: Larger wheels reduce push force and handle thresholds better. Size up for ramps/uneven floors.
A total lock caster brake locks both the wheel and the swivel to reduce rolling and unwanted rotation.
Wheel brakes stop rolling only. Total lock secures wheel + swivel together for better stability under load.
Options range up to 1,250 lbs per caster. A set of four can estimate up to ~5,000 lbs when properly distributed.
Divide total loaded weight by the number of casters, then add margin for uneven floors, corner loading, and impacts.
Two total locks are common for parking control. Use four when you need maximum holding power and minimal movement.
Stem mounts install into a socket (threaded stem options). Plate mounts bolt to a top plate on carts and platforms.
Yes. Wheel material and diameter should match your surface condition and load for best performance.
Larger wheels roll easier over thresholds and reduce push force. Smaller wheels help keep overall height lower.
It’s a planning estimate (4 × per-caster rating). Real-world safe capacity can be lower due to uneven floors and dynamic loads.
Yes—total lock helps keep heavy-duty carts, benches, and platforms secure during staging, loading, and assembly.
These calculators apply to any caster application—even if you’re browsing a different category. Use them to estimate load rating per caster, select wheel material, and estimate push/pull force. Expand any tool for full analysis + a share-ready spec line.
Engineering Tools Hub
All tools + dedicated pages (best for sharing and EEAT). Open hub
Load Calculator (dedicated)
Share this page when discussing load rating per caster. Open load tool
Wheel Diameter Calculator
Publish the dedicated page, then replace this link. Find in hub
Failure Diagnosis Tool
Publish the dedicated page, then replace this link. Find in hub
Trusted by 100,000+ Industrial and Commercial Buyers | 98.7% on-time shipment rate
Designed for engineers, manufacturers, and material handling professionals
