ISO 9001:2015 Quality Manufacturing · ANSI ICWM Performance Tested

98.7% On-Time Ship Rate Across All Orders

200,000+ Orders Fulfilled for OEM & MRO Teams Nationwide

100+ Years of Combined Caster Industry Experience

4.8/5 Star Rating | Thousands of Verified Industrial Reviews

Automatic Bulk Pricing | OEM & MRO Volume Discounts Applied at Checkout

10" × 3" Heavy-Duty Phenolic Wheel Casters

Heavy-duty swivel and rigid casters equipped with 10" diameter by 3" wide phenolic resin wheels. Designed for high static and rolling loads on smooth, dry concrete floors where oil and solvent resistance are required.

Wheel size

10" diameter × 3" tread width

Rated capacity

Up to ~2,500 lbs per caster (model dependent)

Mounting plate

4-1/2" × 6-1/4"

Caster types

Swivel and rigid configurations

Material and wheel performance

Phenolic wheel construction

Phenolic wheels are compression-molded under high pressure and temperature using phenolic resin reinforced with macerated canvas. This produces a hard, non-metallic wheel with excellent load-bearing capability and dimensional stability under static loads.

Floor interaction and wear characteristics

Performs best on smooth, clean, dry concrete floors
Hard tread rolls efficiently and resists flat-spotting under storage loads
Quieter than steel wheels while maintaining high load capacity
May show accelerated wear on rough or damaged concrete

Chemical and environmental resistance

Resistant to oil, grease, gasoline, and many mild chemicals
Non-metallic and non-sparking
Not recommended for wet environments or washdown exposure

Application limitations

Not suited for uneven floors, debris, or floor transitions
Avoid continuous moisture or standing water
Not recommended for chipped or damaged concrete surfaces

Common applications

Heavy industrial carts and platforms
Warehouse and distribution equipment
Tooling carts and storage racks
High-load stationary or low-travel applications

Standards and material properties

Durometer: ~90 Shore D (±5)
Temperature range: -50°F to 250°F
ANSI-tested designs
ICWM dimensional standards

Caster Engineering Tools

These calculators apply to any caster application—even if you’re browsing a different category. Use them to estimate load rating per caster, select wheel material, and estimate push/pull force. Expand any tool for full analysis + a share-ready spec line.

Get Application Help Open Engineering Tools Hub

CasterSpec^™ Load Calculator

Fast estimate. Expand for safety factor + uneven floor + spec output.

▾ Expand full calculator

Load

Total load (lb)

# casters

Floor / bumps