Home > BLOG > What is the Difference Between Casters and Caster Wheels?

What is the difference between a Caster and Caster Wheel?

The perfect guide for understanding Casters and Wheels

What is a Caster?

Casters are the complete assembly of the wheel attached to a frame which is also known as a Caster Yoke, Caster Rig, or Caster Fork. Caster frames go by different names but they are technically the same apparatus that holds the caster wheel in place to makeup a complete caster assembly. For this informative Caster guide we will call caster frames by the more common name which are Caster Forks. Caster forks come in either Swivel or Rigid versions depending on the required application. Most Swivel Caster Forks are made up of 1045 ASTM steel and either cold or hot forged to increase the strength and durability of the steel. Swivel caster forks usually come with a double ball bearing raceway which have two parts known as an upper raceway and lower raceway. Caster fork raceways allow the swivel casters to turn 360 degrees with ease. Depending on the quality of materials used in the manufacturing process some swivel casters will turn much easier and some more difficult. This all depends on the materials used to manufacture the caster and the materials of the ball bearing as well as the inner raceways that contain and hold the ball bearings. Some ball bearings are hardened and heat treated while some are not. After the caster forks are manufactured they are then assembled with a caster wheel and a nut and bolt to hold the wheel to the caster fork. Once all parts are assembled you now have what is known as a Caster. Casters come in different sizes and weight capacities for thousands of applications. Heavy Duty Casters generally come with a much larger wheel diameter and tread width along with a wheel that can withstand a heavier load capacity. Heavy duty Casters are commonly seen with either steel wheels or polyurethane on cast iron wheels which allow a much greater weight capacity than many other type of wheels in the industry. Lighter duty casters and institutional casters require less weight capacity which allows for a greater variety of wheel combinations and materials to perfectly suit your application needs. Casters also come in Stainless Steel for wet and corrosive environments to prevent rust while offering a much longer service life of the caster.

What is a Caster Wheel?

Caster Wheels are simply one component of a caster. Wheels for casters can come in an array if wheel materials including; Polyurethane, Steel, Phenolic, High Temperature, Thermo Plastic Rubber, Mold on Rubber, Ductile Iron, Aluminum, Nylon, Plastic, Urethane, and countless other wheel materials to name a few. Caster Wheels generally have one or two pieces to the wheel. Some are solid one piece wheels such as a Phenolic, Nylon, Polyolefin, or Solid Polyurethane Wheel. One piece caster wheels are more resistant to tread delamination and will wear much better and can typically handle more abusive shock load applications. Two piece caster wheels are known as Polyurethane on Polyolefin or Polyurethane on Steel to name a couple. Two piece caster wheels are either Mechanically bonded to the core or Chemically bonded with industrial glues to allow the tread to bond to the core of the wheel. The benefits of two piece wheels sometimes offer higher weight capacities with superior floor protection allowing a Polyurethane tread to be bonded to a steel core. This type of wheel offers high load capacities and also non-marking floor protection at the same time. In lighter duty caster wheels you might notice two piece casters such as a polyurethane on a polyolefin core wheel. These type of wheels are made for performance as well as to meet a specific price criteria and an array of tread color options. Lighter duty two piece caster wheels are generally mechanically bonded to a polyolefin core which helps prevent the wheel from delaminating from the tread during extensive use. Rolling wheels causes friction and heat build up so a mechanical bond is the best way to prevent the tread from falling off the core of the wheel. Caster wheels come with different bearing options including, Roller Bearings, Precision Bearings, and Delrin Bearings. Each bearing offers different performance characteristics depending on the application. Roller bearings also known as needle nose bearings can handle greater weight loads compared to a precision bearing. Precision bearings handle side thrust much better than a roller bearing. Delrin bearings are typically used in clean room applications or medical applications that cannot have metal around specific machines or corrosive chemicals.

Casters and Wheels work together in tandem. Without a Caster Wheel you would not have a Caster. When the right materials are used in conjunction with a caster and wheel application you can reduce push pull force, increase ergonomics, and save money by reducing the time frame of replacements. Many factors go into deciding the best wheel and caster fork for each application. For expert advice and help please contact our CasterHQ Experts below and we will help you decide which caster is best for you.

Toll Free: 844-439-4335

Email: sales@casterhq.com

Differences between a Caster and a Wheel by CasterHQ