Navigate to the CasterHQ.com homepage

Free Shipping on Orders Over $250!

Offer Exclusive to Casters & Wheels Only

shepherd
Pacer Hooded Caster - Bright Chrome 50mm Diameter | 5/16" x 1-1/2" Grip Neck Stem | 300 lbs load Capacity per set of 4

Pacer Hooded Caster - Bright Chrome 50mm Diameter | 5/16" x 1-1/2" Grip Neck Stem | 300 lbs load Capacity per set of 4

Pacer Hooded Caster - Set of 4 Bright Chrome 50mm Diameter | 5/16" x 1-1/2" Grip Neck Stem | 300 lbs load Capacity per set of 4

0 Reviews
FREE SHIPPING on Orders $250+
$0.00

Bulk Discounts Auto-Applied at Checkout

PRODUCT CODE: PPA50302BC-4
Choose your options:
FINISH TYPE:
SOCKET:
FOR USE IN WOOD | SET OF 4 | HOLE REQUIRED: 3/8" X 1-5/8" | FITS GRIP NECK STEMS
STEM SIZES:

Pacer Hooded Caster - Bright Chrome 50mm Diameter | 5/16" x 1-1/2" Grip Neck Stem | 300 lbs load Capacity per set of 4


The Pacer Series is a sleek modern looking caster that comes with a 5/16" x 1-1/2" Grip Neck Stem. This listing is for four pieces (4) of a Pacer Part#: PPA50302BC Grip Neck Stem Casters are commonly referred to as wood stem casters. These casters are made to mount in wood furniture. Grip neck Stem Casters almost always need to be used with a metal wood socket before installing in wooded furniture. These metal sockets have teeth at the base with a hollow tube that is meant to be inserted inside the wood to allow you to mount the casters. The spikes on the bottom of the socket are meant to be hammered into the furniture after the hole is drilled into the furniture for the socket to be inserted appropriately. After the metal socket is inserted into the furniture, you will use these Grip Neck Stem casters as seen below to insert into the metal socket, these casters will pop into the sockets, and no further adjustments will be needed. Then your furniture will now be safely outfitted with a furniture caster. Long story short, These casters need a socket that would be permanently fixed to the unit you are planning to mount the caster to. This will allow the grip neck stem caster to quickly and safely pop into place.

Single listing product page listing here

Set of 5 product listing page here

Technical Specifications:
Wheel Diameter: 50mm
Mounting Height: 2-3/8"
Swivel Radius: 1-3/4"
Finish Type: Bright Chrome
Dynamic Load Capacity: 75 lbs per caster / 300 lbs per set of 4
Mounting Type: Grip Neck Stem
Mounting Stem Dimensions: 5/16" Diameter x 1-1/2" Long


The most commonly used Socket used in conjunction with these casters can be purchased here.
Socket#: SR2402ZN-M36 | Metal Socket for Wood Furniture | Fits 5/16" x 1-1/2" Grip Neck Stem Caster

Fast Deliveries for any order quantity
Zinc Die-Cast Body and Hood
Concealed Axle
Store Fixtures
Seating
Electronic Equipment
Office Equipment
MADE IN USA
Wheel Diameter: 50mm
Mounting Height: 2-3/8"
Swivel Radius: 1-3/4"
Finish Type: Bright Chrome
Dynamic Load Capacity: 75 lbs per caster / 300 lbs capacity per set of 4
Mounting Type: Grip Neck Stem
Mounting Stem Dimensions: 5/16" Diameter x 1-1/2" Long

Pacer Hooded Caster - Set of 4 Bright Chrome 50mm Diameter | 5/16" x 1-1/2" Grip Neck Stem | 300 lbs load Capacity per set of 4

$43.62

Reviews

Average Rating:
( 0 )