Hamilton Ductile Iron Single Flanged Track Wheel 7 7/8" Diameter x 2 1/4" Face x 3 1/4" Hub length with 3/4" Precision Tapered Roller Bearing, 4,750 lbs Capacity
This listing is for a Hamilton Single Flanged Track Wheel that is made out of Cast Iron with a weight capacity of 4,750 LBS PER WHEEL. HAMILTON PART#: WFT-82SDT-3/4
Rollability:
Durability:
Floor Preservation:
Quiet Operation:
Type:
Single Flanged Track
Material:
Flanged Track
Relative Capacity:
High
Cushioning (Resilience):
Low
Impact Resistance:
Low
Moisture Resistance:
High
Abrasion Resistance:
High
Relative Cost:
Low
Low Temp. Range (F):
-30
High Temp. Range (F):
320
Chemical Resistance:
Medium
Load Capacity (lbs.) @ 3 mph
4750
Wheel Diameter (in.)
7.875
Bearing Type
Tapered
Weight (lbs.)
26.0000
Wheel Color/Finish
Battleship Gray
Note
Published hub length includes 1/4" for cup and flat washers. When used on 40 lb. rail, capacity is 4500 lbs.
Hub Diameter "M" (in.)
3 3/4
Diameter "P" (in.)
9 1/4
Dimmension "R" (in.)
1/4
Face "K" (in.)
3 3/4
Face "S" (in.)
2 1/4
Hub Diameter "N" (in.)
3 3/4
Length "H" (in.)
3 1/2
Suggested Rail Size (in.)
2 (ASCE 45)
Cored Hole (in.)
Solid
Center Design
Solid
V-Groove or Flanged Track
Flanged Track
Wheel Type
Single Flanged Track
Hamilton Ductile Iron Single Flanged Track Wheel 7 7/8" Diameter x 2 1/4" Face x 3 1/4" Hub length with 3/4" Precision Tapered Roller Bearing