Replacement Chair Casters, Furniture Casters, and Display Casters from CasterHQ
CasterHQ offers Replacement Chair Casters for Office Chairs, Dinette Chairs, Displays, and Furniture. This page is for our 2-3/8" or 60mm Chair Casters with a 7/16" x 7/8" Grip Ring Stem also known as a Friction Ring Stem. Our 2-3/8" Chair Casters are known as Twin Wheel Nylon Casters and are great for most floor types including hardwood floors, tile, and carpet. If you have expensive hardwood floors we would recommend upgrading to a Gray Thermo Plastic Rubber wheel which provides a softer cushion ride to avoid scuffing or imprinting on the floors. Our standard 50mm Chair Casters are constructed out of a strong nylon composite and can withstand up to 120 lbs per caster meaning a office chair with 5 casters would be able to support up to 600 lbs or a dinette chair with 4 casters would be able to support 480 lbs using our chair wheels. The nylon composite twin wheel casters are non-marking and will not leave streaks on your floor.
If you are looking for custom chair casters such as brass, black chrome, chrome, or antique brass look no further we have a huge selection of replacement chair casters for your home, business, or office. If you have any questions or need help on measuring your grip ring stem please see our measuring guide below or contact us directly and we will help find you the perfect high quality Chair Caster for your furniture. Protect your floors and buy Chair casters from CasterHQ. Questions? Please Call us @ 844-439-4335 or Contact Us Here For quick online service please email us: email@example.com and a Caster Expert will help you answer any questions.
We ship Fast!!! If ordered before 12-noon we ship all orders typically ship SAME DAY! All orders received after 12-noon will ship the following business day
Measuring Grip Ring Stem Casters for Chairs and Furniture:
The Stem Diameter should be: 7/16" = 0.4375"
Stem Diameter: 7/16"
Stem Length: 7/8"
To measure your Grip Ring / Friction Ring Stem Diameter use a 7/16" Wrench and it should fit nice and flush against the diameter of the stem. You could also get a 7/16" Drill bit and insert into the hole of the chair or leg and it that fits flush then any of our chair casters will replace your casters with ease.