Home > WHEELS ONLY > POLYOLEFIN WHEELS - 4" thru 8" wheels - up to 900 lbs >

Polyolefin Wheel 6" X 2" - Roller Bearing - 700 LBS Capacity

6"X2" Polyolefin Wheel
Polyolefin Wheel 6" X 2" - Roller Bearing - 700 LBS Capacity


 
Our Price: $8.99

Availability:: Usually Ships in 1 to 2 Business Days
Product Code: CB-PO62


BEARING TYPE:


Qty:  

  
Description Technical Specs
 
Caster Barn's Polyolefin Caster Wheels are injection molded from a blend of thermoplastic polymers forming a one piece solid sanitary design. These Polyolefin wheels, as with Nylon wheels, are especially suited for wet and corrosive applications. They are very resistant to most commonly encountered liquids. Polyolefin wheels have a lower capacity and a more limited temperature range than Nylon wheels.

In a cold dry environment, such as a refrigerated store room, Polyolefin wheels may become brittle. They should not be used in a freezer or a heat application above 180°F intermittent usage, such as a rack washer.
Features
  • Hard tread rolls easily, provides good concrete floor protection and is quieter than steel wheels.
  • Resistant to oil, grease & solvents, non-metallic & non-sparking.
  • Economically priced wheel.
  • Zerk fitting are not standard, but available upon request.
  • Durometer: 65 Shore D (+/-5).
  • Temperature range: -40° F to 180° F

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

WHEELS ONLY > POLYOLEFIN WHEELS - 4" thru 8" wheels - up to 900 lbs
WHEELS ONLY