4" X 2" CROWNED GRAY THERMO RUBBER (NON MARKING) WHEEL - 350 LBS CAPACITY

CasterHQ's Crowned Tread 4 inch diameter by 2 inches wide Thermo Plastic Rubber wheels are extremely high quality non-marking gray thermo-plastic engineered rubber tread bonded to an industrial Polyolefin (plastic) core that is used in many applications such as food service, hospitals, laboratories, and many institutional applications and industries. Thermo Plastic Wheels are also known as TPR Wheels, Thermo Wheels, and Thermo Plastic Rubber wheels. These wheels are softer than a standard polyurethane wheel you would normally use. With a 75 Shore A Durometer (Softness of Wheel); these are exclusively made to roll over debris, gaps, cracks, obstacles with ease. The softer tire allows it to grip and roll over obstacles as opposed to harder wheels that will just push or get stuck while rolling.

These gray soft rubber wheels are non-marring, nonmarking, quiet, absorb shock, vibrations, and protect equipment and floors and many floor surfaces. The only setback to this type of wheel is the roll-ability is slightly less compared to a harder wheel since the thermoplastic rubber wheel provides more cushion to protect expensive cargo. Thermo Rubber wheels are not meant to have heavy loads sitting in one spot for long periods of time or they could potentially develop flat spots in the wheels and it will make them harder to roll. The tread is chemically bonded with industrial glue, if these are exposed to extremely harsh chemicals or high speeds and heat can affect the quality of the glue and could possibly compromise the tread. These wheels have been around for a very long time for a reason, and that is to protect cargo, floors, and provide an extremely quiet ride. If you have any application questions please feel free to contact us.

• NON MARKING THERMO RUBBER TREAD CHEMICALLY BONDED TO A POLYOLEFIN CORE
• RESISTANT TO CLEANING CHEMICALS, ACIDS, ALCOHOL, AND WATER
• DUROMETER: SHORE A 75 (+/-5)
• TEMPERATURE RANGE: -20F - 180F
• CROWNED TREAD = EASIER PUSH/PULL (Slightly Less Shock Absorption)

• WHEEL DIAMETER: 4" (Crowned)
• TREAD WIDTH: 2"
• HUB LENGTH: 2-7/16"
• LOAD CAPACITY: 350 LBS
• AVAILABLE COLOR: GRAY ON GRAY
• BEARING TYPE: 1/2" ID ROLLER BEARING W/ 1/2" SPANNER BUSHING INCLUDED